dual series ? independently controlled dual output solid-state relay ? ratings from 25a to 40a @ 24-530 vac ? industry standard package ? scr output for heavy industrial loads ? dc control ? zero-crossing (resistive loads) or random-fire (inductive loads) output product selection control voltage 25a 40a 4-15 vdc d2425d d2440d 15-32 vdc d2425de d2440de 4-15 vdc h12d4825d h12d4840d 15-32 vdc h12d4825de h12d4840de available options output specifications (1) description d2425xx d2440xx h12d4825xx h12d4840xx operating voltage (47-63hz) [vrms] 24-280 24-280 48-530 48-530 transient overvoltage [vpk] 600 600 1200 1200 maximum off-state leakage current @ rated voltage [marms] 10 10 10 10 minimum off-state dv/dt @ maximum rated voltage [v/sec] (2) 500 500 500 500 maximum load current (3) [arms] 25 40 25 40 minimum load current [arms] 0.15 0.15 0.15 0.15 maximum surge current (16.6ms) [apk] 250 625 250 625 maximum on-state voltage drop @ rated current [vpk] 1.6 1.6 1.6 1.6 thermal resistance juncti on to case (rjc) [c/w] 1.02 0.63 1.02 0.63 maximum i 2 t for fusing (8.3 msec) [a 2 sec] 260 1620 260 1620 minimum power factor (with maximum load) 0.5 0.5 0.5 0.5
input specifications (1) description d24xxd h12d48xxd e-suffix control voltage range 4-15 vdc 4-15 vdc 15-32 vdc minimum turn-on voltage 4.0 vdc 4.0 vdc 15.0 vdc minimum turn-off voltage 1.0 vdc 1.0 vdc 1.0 vdc typical input current @ 5 vdc (@ 24 vdc for e-suffix) 13 ma 13 ma 15 ma nominal input impedance 300 ohm 240 ohm 1500 ohm maximum turn-on time [msec] (4) 1/2 cycle 1/2 cycle 1/2 cycle maximum turn-off time [msec] 1/2 cycle 1/2 cycle 1/2 cycle general specifications description parameters dielectric strength, input/output/base (50/60hz) 4000 vrms minimum insulation resistance (@ 500 v dc) 10 9 ohm maximum capacitance, input/output 10 pf ambient operating temperature range -40 to 80c ambient storage temperature range -40 to 125 c weight (typical) 3.0 oz (86.5g) encapsulation thermally conductive epoxy terminals .25" fastons, .025" square pins general notes 1) all parameters at 25c and per section unless otherwise specified. 3) off-state dv/dt test method per eia/narm standard rs-443, paragraph 13.11.1 3) heat sinking required, for derating curves see next page. 4) turn-on time for random turn-on (-10) versions is 0.1 msec mechanical specifications
wiring diagram thermal derate information agency approvals e1 16 94 9 lr81 68 9 (2 40 v on ly) 5 90 2 ug rev. 110910
annex - enviromental information
|